Unregistered
|
|||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
| PT Performance Archive Threads that have had no activity for over 6 months from the PT Performance forum - new threads and replies are not allowed here |
|
|
LinkBack | Thread Tools | Display Modes |
|
|||
|
Hi , I put a volant in awhile back and found one problem you might want to check . From inside the drivers side wheel well remove the little panel used to get to the headlight bulbs . you'll then see the intake tube on the volant that sticks thru the fender well . on mine the end of that tube was angled wrong and actually blocked alot of airflow due to being so close to the splash shield . The fix is easy . With the volant in place , and the intake tube pushed securely into the fender well , look at the end of the tube from inside the wheel well , where it comes thru the fender , draw a line on the tube as best you can right where it comes thru the fender , just use the edge of the hole in the fender as your guide . Remove the volant , with a hacksaw saw the tube off where you drew the line , re-install the volant and make sure the tube is in the fender hole . The volant is a great system , why they angled the tube that way is a mystery . Have a good day .
|
|
||||
|
Quote:
__________________
2001 Black 27F Cruise Edition with Moonroof, Volant intake, 2.5" Borla Exhaust , Header, blinking eye skull shift knob, and Eibach springs |
|
||||
|
Quote:
__________________
2001 Black 27F Cruise Edition with Moonroof, Volant intake, 2.5" Borla Exhaust , Header, blinking eye skull shift knob, and Eibach springs |
| Thread Tools | |
| Display Modes | |
|
|