PT Enthusiasts PT Cruiser Forum

Unregistered


PTE is and always will be free. However, if you'd like to help offset the costs of running the site - feel free to drop some loose change into our PTE Tip Jar (powered by PayPal).
Thanks - Scott K (PTAdmin)
PTE's famous PT Forums - all the discussion you could ever want about the PT Cruiser List of upcoming PT events PTE's Image archive, member rides, concepts, etc. Frequently Asked Questions about the PT Cruiser All the technical data, etc. you could ever want about the PT Cruiser


Go Back   PT Forums - The PT Cruiser Enthusiasts and Owners Resource > Owner Discussion > Owner Discussion Archive > Non-PT General Discussion Archive
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Non-PT General Discussion Archive Threads that have had no activity for over 6 months from the Non-PT General Discussion forum - new threads and replies are not allowed here

 
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 23rd March 2004, 01:57 PM
GOLDMEMBER's Avatar
PT Obsessed
 
Join Date: 27th September 2002
Location: London, Ont, Canada
Posts: 13,000
Send a message via ICQ to GOLDMEMBER Send a message via AIM to GOLDMEMBER Send a message via MSN to GOLDMEMBER Send a message via Yahoo to GOLDMEMBER
Default Sammy's Latest Mod!!

And What a Mod!!!







I snapped my rear drive shaft into shrapnel, luckly its 4 wheel drive now limping around on front wheel drive. The shop is replacing it. It had been custom built and was suppose to be rated for 1000hp, I guess not.

Attached Thumbnails
sammy-s-latest-mod-sammy-007.jpg  
__________________



2002 Dream Cruiser 1 4434 - Shaved, Slammed and Bruised.
2009 Inferno Red Journey SXT - Pup my Ride Eddy's Car
1995 Plymouth Acclaim
1986 Sammy - powered by Small Block



  #2 (permalink)  
Old 23rd March 2004, 03:45 PM
goldenturtle's Avatar
PT Addict
 
Join Date: 19th October 2002
Location: western Maryland
Posts: 3,964
Default Re: Sammy's Latest Mod!!

Holy Mackeral, how much horsepower you got there????
__________________
'02 Dream Cruiser # 4235
Never argue with an idiot... They will drag you down to their level, and beat you with experience.
  #3 (permalink)  
Old 23rd March 2004, 04:17 PM
MINIMOTOMike's Avatar
PT Guru
 
Join Date: 17th October 2003
Location: cuyahoga falls ohio
Posts: 1,123
Send a message via AIM to MINIMOTOMike Send a message via MSN to MINIMOTOMike Send a message via Yahoo to MINIMOTOMike
Default Re: Sammy's Latest Mod!!

Wait a minute here?! what's this on? what kind of car?
__________________
~~Running with scissors since 1970~~
http://www.cardomain.com/memberpage/584339


  #4 (permalink)  
Old 23rd March 2004, 04:21 PM
NSCR FAN's Avatar
PT Obsessed
 
Join Date: 30th January 2003
Location: Decatur, IL
Posts: 6,412
Default Re: Sammy's Latest Mod!!

Bill, you know that I love your mods, but have you maybe gone too far with Sammy? Seems like the new engine is breaking every part it is in contact with.
__________________




Lotsa' shiney things and

A Marc St. Louis Graphic !
  #5 (permalink)  
Old 23rd March 2004, 04:31 PM
RallyDRock's Avatar
Veteran Enthusiast
 
Join Date: 25th February 2003
Location: Long Island
Posts: 657
Send a message via AIM to RallyDRock Send a message via Yahoo to RallyDRock
Default Re: Sammy's Latest Mod!!

careful you dont wheelie and flip it over now bill
__________________
Silver '01 LTD 5sp - HRC Turbo, K+N FIPK, Borla Cat Back, Springs, Konis, UR Pulley, Hurst, Poly Bushings, FD Strut Bar, Solid Motor Mounts, Blane's, Billet Locks, AutoVation Pedals, $20 Catch Can, Boogers, Wilwoods, 18" Flik Artic-B or 17" Speedline Monte Carlo
  #6 (permalink)  
Old 23rd March 2004, 05:36 PM
GOLDMEMBER's Avatar
PT Obsessed
 
Join Date: 27th September 2002
Location: London, Ont, Canada
Posts: 13,000
Send a message via ICQ to GOLDMEMBER Send a message via AIM to GOLDMEMBER Send a message via MSN to GOLDMEMBER Send a message via Yahoo to GOLDMEMBER
Default Re: Sammy's Latest Mod!!

Its an 1986 Suzuki Samrai with tricked out S10 V6 dyno'd around 242hp Edlebrock manifold and dual 390cfm Webber carbs

When I picked it driving next a ricer I pulled away from a light and left a burn wheel burn out about 10 ten feet long.

The other day I didn't step on it at all, I was pulling away from a light on a highway then there was a huge BAM !! Followed by lots of &*#$%&
This thing has so much torque is not funny I already broke a weld on the transfer case and had problems a motor mount. Its alot of fun I drive this thing to work when its not in the shop. Accually its running really good now except I only have one drive shaft powering the front wheels
__________________



2002 Dream Cruiser 1 4434 - Shaved, Slammed and Bruised.
2009 Inferno Red Journey SXT - Pup my Ride Eddy's Car
1995 Plymouth Acclaim
1986 Sammy - powered by Small Block

  #7 (permalink)  
Old 23rd March 2004, 05:50 PM
Air Ride PT's Avatar
PT Guru
 
Join Date: 22nd February 2003
Location: Flint, MI; Sylmar,CA; Erlanger, KY
Posts: 1,196
Send a message via AIM to Air Ride PT
Default Re: Sammy's Latest Mod!!

so if the drive shaft is gone now, would that make it a stage 1 weight reduction
  #8 (permalink)  
Old 24th March 2004, 06:13 AM
GOLDMEMBER's Avatar
PT Obsessed
 
Join Date: 27th September 2002
Location: London, Ont, Canada
Posts: 13,000
Send a message via ICQ to GOLDMEMBER Send a message via AIM to GOLDMEMBER Send a message via MSN to GOLDMEMBER Send a message via Yahoo to GOLDMEMBER
Default Re: Sammy's Latest Mod!!

Quote:
Originally Posted by NSCR FAN
Bill, you know that I love your mods, but have you maybe gone too far with Sammy? Seems like the new engine is breaking every part it is in contact with.
I thought about 383 Chevy crate engine but I can't afford to go overboard on 2 cars at the same time.. I did remember seeing a Samurai running with a blown 5 liter mustang engine and NOS.. It did the best burnout ever. even with the tricked out V6 it goes like Stink. It has 572 gears on the rear end for rock clrawliing
__________________



2002 Dream Cruiser 1 4434 - Shaved, Slammed and Bruised.
2009 Inferno Red Journey SXT - Pup my Ride Eddy's Car
1995 Plymouth Acclaim
1986 Sammy - powered by Small Block

  #9 (permalink)  
Old 24th March 2004, 06:23 AM
JOEM's Avatar
PT Obsessed
 
Join Date: 11th December 2001
Location: Dayton, Ohio
Posts: 17,710
Default Re: Sammy's Latest Mod!!

Quote:
Originally Posted by GOLDMEMBER
I thought about 383 Chevy crate engine but I can't afford to go overboard on 2 cars at the same time..
Too late!

Really, Bill, if you want to keep a garage queen, go ahead. But that Suzy isn't going to take the power you want to jam in her. Dump it and find a used (gasp!) American 4x4 that's made to handle V-8 power. A vintage Cherokee would be a good mule.
__________________
--JOEM\01 Base Cranberry Cruiser, painted flames by Mayabb's Hot Rods, Keystone Good Hood, PTeazer roll pan, Stull billet grille, Mooneyes '39 "Devil" taillights, Flipen Hood, Hurst shifter, JBA header, AirRaid intake system, PowerAid throttle body spacer, Bassani single exhaust, Wildfire strut bar, Progress lowering springs, Progress sway bars, chrome engine bits, lots of interior chrome and billet stuff. Moon discs, Futura Super Sport tires.
03 Dodge Ram HEMI (345 HP, no waiting)
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -7. The time now is 06:56 PM.



Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.1.0
© 1999-2007 PTEnthusiasts.org