Ok...here's another part that involves some involvement on your part...other than bolt this there and go. The connections of the EGR tube used between the standard manifold and the GT manifold are different. Here is a picture of what Bob supplies us with...
What you are going to have to do is cut the elbow section off of the old EGR tube. Test fit the GT manifold into place and look to see about how far down you are going to have to cut. Mark it, get your pipe cutter, and twist away!
Before you slip the new end connection into the tube...get something like JB Weld putty to cement it together and hold it in place. Here's a picture of it all in place with a big chunck of JB Weld...
